Approved on 27 July 2016, updated on 14 April 2022
The Pladias Database contains critically revised data on Czech flora and vegetation managed by the Department of Botany and Zoology, Faculty of Science, Masaryk University (MUNI) and the Institute of Botany, The Czech Academy of Sciences (IBOT), including data files provided by other institutions or individuals (hereafter "providers"). Its aim is to promote the use of data on plant diversity of the Czech Republic for scientific research, education, nature conservation and environmental assessment. The decisions about the concept of the database, inclusion of specific data files and data provisions are made by the Management Board of the Pladias Database (hereafter "Governing Board", Appendix 1), which follows these Rules and respects the observance of the interests and rights of the individual providers.
The decisions about the inclusion of particular data files into the database are taken by the Governing Board. The provider is responsible for obtaining permission to transmit data to the Pladias Database from any other parties that may have property or intellectual rights to these data or their subsets. Provider of each data set specifies to what extent and under what conditions the data may be used or provided to third parties. The Governing Board supports the largest possible public availability of data while respecting the rights of providers to restrict public access to their data and securing compliance with the conditions of use set by data providers.
The Pladias Database contains
Public data (both freely available and available after registration) can be used for basic and applied scientific research, teaching, nature conservation and environmental assessment. Their potential use for commercial purposes is subject to approval by the Governing Board or the provider of particular data subsets. The use of data for the purposes of funded projects or expert reports contracts by governmental, educational and research institutions and NGOs is not considered as commercial use.
Non-public data can be provided upon request sent by e-mail to members of the Management Board (Appendix 1). The application must contain a delimitation of the extent of the required data, a description of the purpose of their use, and specification of the planned result (e.g. publication, research report or educational presentation). If the expected data use assumes the cooperation of several people, their nominal list is added to the application. The decision about the provision of species trait data and conditions of their use for the given purpose is made by their provider or, in the case of trait data owned by MUNI or IBOT, or species distribution data, by the Governing Board.
When using any data from the Pladias Database (including distribution maps) in publications, research reports or teaching and public presentations, the user specifies the data source "Pladias Database of Czech Flora and Vegetation, www.pladias.cz", and, in the scientific literature, also cites the article Chytrý et al. (2021). When using species distribution data, the user also cites the article Wild et al. (2019). When using specific plant trait data or species lists, the user also cites the original sources referred to in the Pladias Database. When using texts or images that the Pladias Database has taken from published sources (especially Flora of the Czech Republic, Vegetation of the Czech Republic, Phytocartographic Syntheses of the Czech Republic and articles with species distribution maps published in the journal Preslia), the user cites only those published sources. When using images of plants or vegetation types from the Pladias Database website, the user quotes the author of the image and the source "www.pladias.cz".
In the case of research studies that intend to use a large part of the Pladias database or data from the Pladias database will form a substantial part of data used in the study, the leader or coordinator of the study is obliged to contact the Governing Board of the Pladias Database to discuss possible cooperation between the authors or providers of these data, even if public data were used.
Non-public data obtained from the Pladias Database must not be transferred to other institutions or persons or posted on the Internet. The exception is sharing them with colleagues working on a project that uses specific data, which can be done after prior approval by the provider or by the Governing Board.
The user of data obtained from the Pladias Database helps to improve the quality of the database by reporting any detected errors in the data to the Governing Board or the provider of the particular data file.
References
The checklist includes taxa of vascular plants including hybrids, cultivated plants and aggregates that were used in the Key to the flora of the Czech Republic (Kaplan et al. 2019).
Data source and citation
Kaplan Z., Danihelka J., Chrtek J., Kirschner J., Kubát K., Štech M. & Štěpánek J. (eds) (2019) Klíč ke květeně České republiky [Key to the flora of the Czech Republic]. Ed. 2. – Academia, Praha.
The checklist of vascular plants of the Czech Republic (Danihelka et al. 2012) includes 3557 species (plus 194 additional subspecies) and 609 (plus 13 additional nothospecies) hybrids. Of these, 2256 species are native, 464 naturalized (228 archaeophytes and 236 neophytes) and 837 casual aliens. Further, 324 cultivated taxa of different ranks are listed.
Data source and citation
Danihelka J., Chrtek J. Jr. & Kaplan Z. (2012) Checklist of vascular plants of the Czech Republic. – Preslia 84: 647–811.
The checklist includes 4626 taxa of vascular plants including hybrids, cultivated plants and aggregates that were used in the Key to the flora of the Czech Republic (Kubát et al. 2002).
Data source and citation
Kubát K., Hrouda L., Chrtek J. Jr., Kaplan Z., Kirschner J. & Štěpánek J. (eds) (2002) Klíč ke květeně České republiky [Key to the flora of the Czech Republic]. – Academia, Praha.
The Catalogue includes alien (non-native) taxa of vascular plants, i.e. those that arrived in the country as a result of intentional or unintentional introduction by human activity. They are divided based on their residence time (archaeophytes introduced before the end of the Medieval vs neophytes introduced in the Modern Period).
Alien taxa are divided into three categories reflecting their position in the invasion process. Taxa that only reproduce occasionally in the Czech Republic, do not form self-replacing populations, and rely on repeated introductions for their persistence are termed casuals. Naturalized taxa are alien plants that reproduce in the wild and sustain populations over many life cycles without direct intervention by humans (or in spite of human intervention). Invasive plants are naturalized plants that produce reproductive offspring, often in very large numbers, at considerable distances from parent plants and thus have the potential to spread over a considerable area.
The Catalogue also contains other data about alien taxa, such as their geographic origin and introduction pathways.
Data source and citation
Pyšek P., Sádlo J., Chrtek J. Jr., Chytrý M., Kaplan Z., Pergl J., Pokorná A., Axmanová I., Čuda J., Doležal J., Dřevojan P., Hejda M., Kočár P., Kortz A., Lososová Z., Lustyk P., Skálová H., Štajerová K., Večeřa M., Vítková M., Wild J. & Danihelka J. (2022) Catalogue of alien plants of the Czech Republic (3rd edition): species richness, status, distributions, habitats, regional invasion levels, introduction pathways and impacts. – Preslia 94: 447-577. https://www.preslia.cz/article/view?id=11548
The Catalogue includes alien (non-native) taxa of vascular plants, i.e. those that arrived in the country as result of intentional or unintentional introduction by human activity. They are divided based on their residence time (archaeophytes introduced before the end of the Medieval vs neophytes introduced in the Modern Period).
Alien taxa are divided into three categories reflecting their position in the invasion process. Taxa that only reproduce occasionally in the Czech Republic, do not form self-replacing populations, and rely on repeated introductions for their persistence are termed casuals. Naturalized taxa are alien plants that reproduce in the wild and sustain populations over many life cycles without direct intervention by humans (or in spite of human intervention). Invasive plants are naturalized plants that produce reproductive offspring, often in very large numbers, at considerable distances from parent plants and thus have the potential to spread over a considerable area.
The Catalogue also contains other data about alien taxa, such as their geographic origin and introduction pathways.
Data source and citation
Pyšek P., Danihelka J., Sádlo J., Chrtek J. Jr., Chytrý M., Jarošík V., Kaplan Z., Krahulec F., Moravcová L., Pergl J., Štajerová K. & Tichý L. (2012) Catalogue of alien plants of the Czech Republic (2nd edition): checklist update, taxonomic diversity and invasion patterns. – Preslia 84: 155–255.
This table contains a list of vascular plants of the Czech Republic (Kaplan et al. 2019) with data on their origin in the Czech Republic and invasive status (Pyšek et al. 2022), Red List status (Grulich 2017) and legal protection.
Zdroj dat a citace
Grulich V. (2017) Červený seznam cévnatých rostlin ČR [The Red List of vascular plants of the Czech Republic]. – Příroda 35: 75–132.
Kaplan Z., Danihelka J., Chrtek J., Kirschner J., Kubát K., Štech M. & Štěpánek J. (eds) (2019) Klíč ke květeně České republiky [Key to the flora of the Czech Republic]. Ed. 2. – Academia, Praha.
Pyšek P., Sádlo J., Chrtek J. Jr., Chytrý M., Kaplan Z., Pergl J., Pokorná A., Axmanová I., Čuda J., Doležal J., Dřevojan P., Hejda M., Kočár P., Kortz A., Lososová Z., Lustyk P., Skálová H., Štajerová K., Večeřa M., Vítková M., Wild J. & Danihelka J. (2022) Catalogue of alien plants of the Czech Republic (3rd edition): species richness, status, distributions, habitats, regional invasion levels, introduction pathways and impacts. – Preslia 94: 447-577. https://www.preslia.cz/article/view?id=11548
Data on taxon occurrence in habitats of the Czech Republic are based on the analysis of vegetation plots from the Czech National Phytosociological Database (Chytrý & Rafajová 2003) and its expert revision and completion based on the literature and field experience, especially for rare and taxonomically problematic taxa. The classification recognizes 88 basic habitats aggregated to 13 broader habitats that are defined by Sádlo et al. (2007: their Appendix 1):
Taxon occurrence in each habitat is assessed on a four-degree scale:
Data source and citation
Sádlo J., Chytrý M. & Pyšek P. (2007) Regional species pools of vascular plants in habitats of the Czech Republic. – Preslia 79: 303–321.
Further references
Chytrý M. & Rafajová M. (2003) Czech National Phytosociological Database: basic statistics of the available vegetation-plot data. – Preslia 75: 1–15.
Indicator values are expressed on ordinal scales defined by Ellenberg et al. (1991). The values for individual taxa have been modified and extended for the Czech flora by Chytrý et al. (2018). Indicator values are provided for six factors:
Light – a scale from 1 to 9, in which higher values indicate higher requirements for light. Indicator values for trees relate to juvenile individuals growing in the herb or shrub layer.
Temperature – a scale from 1 to 9, in which higher values indicate requirements for higher temperature.
Moisture – a scale from 1 to 12, in which higher values indicate requirements for more water.
Reaction – a scale from 1 to 9, in which higher values indicate taxon affinity to more base-rich environments. In acidic environments, the value can be considered as a proxy for pH, while in near-neutral or alkaline environments it is more a proxy for calcium concentration.
Nutrients – a scale from 1 to 9, in which higher values indicate higher requirements for nitrogen or phosphorus availability, or higher primary productivity of the site.
Salinity – a scale from 0 to 9, in which higher values indicate higher tolerance to conditions with high concentration of soluble salts, especially sulphates, chlorides and carbonates of sodium, potassium, calcium and magnesium.
The dataset for download contains the variables L, T, M, R, N and S with numerical values for all taxa except parasitic epiphytes, while in the variables Lx, Tx, Mx, Rx and Nx the numerical value is replaced by “x” in generalists. In any calculations of site mean indicator values, we recommend to use the latter set of variables and consider “x” as missing values, because inclusion of generalist decreases accuracy of prediction of environmental conditions. We did not define any generalists for salinity, therefore the site mean indicator values for salinity should be calculated using the variable S; in this case it is important that the zero values are included in calculations.
Data source and citation
Chytrý M., Tichý L., Dřevojan P., Sádlo J. & Zelený D. (2018) Ellenberg-type indicator values for the Czech flora. – Preslia 90: 83–103.
Further references
Ellenberg H., Weber H. E., Düll R., Wirth V., Werner W. & Paulißen D. (1991) Zeigerwerte von Pflanzen in Mitteleuropa. – Scripta Geobotanica 18: 1–248.